Why is switchboard thermal imaging important for factories?

factories typically run high, sustained electrical loads — exactly the conditions that surface latent switchboard faults. Thermal imaging finds these before they cause downtime, equipment damage or fire.

Is the inspection disruptive?

No — scans are performed live, under load. No shutdown required. The provider opens accessible panels with appropriate PPE.

How often should we schedule inspections?

Annually is the most common interval; higher-risk operations often schedule every 6 months. Confirm with your insurer.

Do you scan MCCs and motor starters?

Yes — where they can be safely accessed for live thermographic inspection.

Can we schedule during planned shutdown?

Scans must be performed under load, but reporting and follow-up remedial work can be coordinated around planned shutdowns.

Do you cover sites Australia-wide?

Yes — we connect you with licensed providers in every capital city and most regional areas.

Switchboard Thermal Imaging for Factories

Switchboard thermal imaging for factories

Factory switchboards and MCCs sit at the heart of production. A single failed contactor or loose busbar connection can stop a production line for hours. We're a referral and lead-generation service — we don't perform the inspection ourselves. We connect you with a qualified, licensed electrician or thermographer in our provider network who specialises in switchboard thermal imaging.

What's Included

Inspection of all accessible switchboards on site
Live, under-load infrared scanning
Hot spot, loose connection and overload identification
Severity-rated written report
Thermal and visible-light photos per finding
Recommended remedial actions

Who Needs This

Factories owners and operators
Facility and maintenance managers
Insurance and risk managers
Production and plant managers
Maintenance planners
Industrial property owners

Why It Matters

Factory switchboards and MCCs sit at the heart of production. A single failed contactor or loose busbar connection can stop a production line for hours. Scheduled switchboard thermal imaging is one of the most cost-effective preventative measures available for factories — and it's a documented record of due diligence for insurers.

Why factories need switchboard thermal imaging

Factory switchboards and motor control centres run motors, drives, ovens and process loads with heavy starting currents and continuous duty. The defects that show up most often during a switchboard thermal imaging inspection are hot terminations on incomers and busbars, phase imbalance on three-phase distribution, overheated contactors and starters, and degraded breakers feeding high-cycle motor circuits.

Insurance and maintenance reasons for factories

Most industrial insurance policies expect a periodic switchboard thermal imaging report — annually for general factories, often six-monthly where production is process-critical. A current report is also one of the simplest pieces of evidence a maintenance team can use to defend its preventative maintenance program internally.

What the switchboard thermal imaging report typically covers for factories

Factory reports normally cover the main incoming switchboard, MCCs, distribution boards across the production floor and any plant or services boards. Findings are graded by severity so urgent rectification can be scheduled into the next planned shutdown rather than triggering an unplanned one.

How It Works

1
Submit your details
Tell us about your site, switchboard count and timing.
2
Get matched
We connect you with a qualified provider in your area.
3
On-site inspection
A licensed electrician or thermographer attends with calibrated thermal imaging equipment.

Frequently Asked Questions

Ready to book your inspection?

Get matched with a qualified electrician in your area. Fast, no obligation, Australia-wide.

Request Your Quote